How to lay a patio: a step-by-step guide to building a patio Luckily, the options suit different budgets and abilities. Pavers and poured concrete offer an elevated style with more installation effort. Choose the right DIY material for your yard based on cost, available tools, and skill level. After installing a tamped, leveled crushed stone base lay pavers in your preferred pattern. Sweep polymeric sand over the surface and into joints, then lightly mist with water. This step will prevent weeds and secure the pavers in place.
Tools
My metal bars are lying diagonally in the photo above because I needed to slope my patio in two directions. You can also use the float if there are any spots that you accidentally pulled a piece of gravel through and it made a divot, or your hand hit. You may need to slide the screed back and forth (left to right) to help even the sand out. Next, use a marker to mark a line where you pulled the strings to (this will be a backup just in case you do lose a string line –I had one snap on me). Reminder- due my patio being boxed in on all four http://prsync.com/clear-view-builders/ sides, my photos show the stakes placed inside the patio area.
They can mimic patterns like brick, slate, and stone in concrete.Read on for seven fun ways to add some shade to your patio.On this job we used the sand layer because the patio was covered by an enclosed porch above, and because it made it much easier to fit the stones in place.
The prep involved will depend on your area, but basically, you will need to use a shovel to dig down at least 6” into the soil. It’s possible to go wider, but you’ll then want to go with a larger stone which can be more difficult to find and more expensive. Well, I’m not always an advocate of making everything a DIY project. I mean, if it doesn’t save you money and requires a lot more work- then it may not be reasonable to do. Having a covered patio shade can help keep the are cooler during the summer months and protect it from rain.
When you’re gathering your supplies, you’ll want to consider the type of material that will fill in the gaps between the concrete pavers. They can be square or come in natural stone shapes and be laid in a wide variety of patterns. When it comes to concrete patios, there’s only one option for design because they are concrete slabs. Sure you can color the concrete, or stamp it, but it’s going to be one solid piece. When researching costs for purchasing patio paver stones and having them installed, estimates ran between $10-$22 per square foot. DIY concrete patio pouring is certainly doable with good planning, tools, and assistance. The bricks are laid on the ground, over a layer of compacted gravel topped by landscape fabric and a smooth layer of sand. After the bricks are laid, sweep polymeric sand into the cracks between the bricks to lock them in place. Before you begin to excavate the area for your concrete patio, it's important to do some planning. Determine the location, size, and exact dimensions of your patio. This will help you understand how much concrete you will need and whether you will require a mixer. If your patio is too large, it may not be a suitable DIY project.
